ENERGY GENERATION, ELECTRIC ENGINEERING AND ELECTROMECHANICS

CFD Modeling of the Acceptability of Using Pellets Common on the Ukrainian Market as Fuel for a Pellet Boiler with Retort-Type Burner

Authors

A. Yu. Rachуnskyі
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” ROR
V. V. Baranyuk
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” ROR
O. O. Pikenin
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” ROR
A. I. Bordiian
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” ROR
DOI https://doi.org/10.31649/1997-9266-2025-180-3-47-55

Keywords

pellets CFD modeling combustion model without premixing heat transfer radiant heat transfer convection

Abstract

SET boilers are designed for heat supply of residential buildings, municipal and industrial buildings, equipped with heating systems with natural or forced circulation of water as a coolant. Sketch drawings and some thermal hydraulic characteristics of these boilers are presented in the open access. The developer website states that the boilers operate with automated loading of pellets from wood waste. The developers emphasize that it is possible to use other types of solid fuel with a change in the technical characteristics and service life of the boiler.

In order not to conduct a costly experiment with existing equipment, the authors developed a CFD (Computation Fluid Dynamics) model of the processes taking place in a SET water-heating boiler with a capacity of 25 kW when burning various types of pellets using modern ANSYS-Fluent software package. The calculations were performed using the academic license of the ANSYS Student software package. This license is completely free (since 2015) and is intended for solving introductory and educational tasks in an academic environment. When modeling the processes that occur during the combustion of pellets as a fuel, the authors conducted a simulation of the thermal hydraulic characteristics of the flow of a continuous gas phase during its interaction with a discrete phase in the form of pellet granules. The results of CFD modeling were verified according to the passport data presented by the developer of the SET-25 boiler for the case of burning wood pellets. It was shown that the discrepancy of the results does not exceed 2%, therefore the developed model can be used to simulate the combustion of other common types of pellets - from coniferous wood, rapeseed, from bird droppings and straw, as well as from bottom sludge. The results obtained can be useful when designing new designs of water heating boilers and verifying the calculation of the existing ones.

242 166

How to Cite

[1]
“CFD Modeling of the Acceptability of Using Pellets Common on the Ukrainian Market as Fuel for a Pellet Boiler with Retort-Type Burner”, Вісник ВПІ, no. 3, pp. 47–55, Jun. 2025, doi: 10.31649/1997-9266-2025-180-3-47-55.

Author Biographies

A. Yu. Rachуnskyі, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”

Cand. Sc. (Eng.), Assistant Professor, Assistant Professor of the Department of Heat and Alternative Power Engineering

V. V. Baranyuk, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”

Cand. Sc. (Eng.), Associate Professor, Associate Professor of the Chair of Heat and Alternative Power Engineering, Institute of Thermal Energy Technologies of the NAS of Ukraine

O. O. Pikenin, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”

Senior Lecturer of the Chair of Space Engineering, Educational and Research Institute of Aerospace Technologies

A. I. Bordiian, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”

Post-Graduate Student, of the Chair of Digital Technologies in Power Engineering Educational and Scientific

References

Про види твердопаливних котлів. [Електронний ресурс]. Режим доступу: https://altep.ua/articles/pro-vikidi. 16.01.2022 р.
Паливні пелети. Характеристики і види. [Електронний ресурс]. Режим доступу: https://galmet.com.ua/yak-tse-pratsyuye/palyvni-pelety-harakterystyky-ta-vydy.html . 13.03.2025 р.
Все про пелети. [Електронний ресурс]. Режим доступу: http://liberator.com.ua/ua/vse-pro-peleti/ . 16.01.2022 р.
M. Nekhamin, I. Beztsennyi, N. Dunayevska, and V. Vyfatnuik, “On using the ANSYS FLUENT software for calculating the process of burning a mixture of particles from different types of solid fuels,” Eastern-European Journal of Enterprise Technologies, no. 4(8 (106)), pp. 48-53, 2020. https://doi.org/10.15587/1729-4061.2020.209762 .
A. A. Bhuiyan, and J. Naser (2015). “CFD modelling of co-firing of biomass with coal under oxy-fuel combustion in a large scale power plant,” Fuel, no.159, pp.150-168. https://doi.org/10.1016/j.fuproc.2012.05.011 .
F. Okasha, “Modeling combustion of straw–bitumen pellets in a fluidized bed,” Fuel Processing Technology, no, 88, pp. 281-293, 2007.
T. Ferreira, J. M. Paiva, and C. Pinho, “Comparative analysis of fluidized and fixed beds to obtain data on the Char Pellet’s combustion regime,” International Journal of Energy for Clean Environment, no. 21, pp. 237-68, 2020. https://doi.org/10.1615/InterJEnerCleanEnv.2020034698 .
A. S. Mikhailov, O. A. Evdokimov, A. I. Guryanov, and N. S. Spesivtseva, “Influence of the fractional composition of composite fuel granules on their characteristics as an energy source,” International Journal of Energy for Clean Environment, no. 18, pp. 231-42, 2017. https://doi.org/10.1615/InterJEnerCleanEnv.2017020710 .
H. D. Yildizay, and A. Esiyok, “Experimental investigation of coal and pellet combustion in a manual loaded stove,” Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, no. 1, pp. 1-15, 2021. https://doi.org/10.1080/15567036.2021.1983085 .
Автоматичний пелетний котел СЕТ 25 АП, 25 кВт. [Електронний ресурс]. Режим доступу: https://teplo-mag.com.ua/p1166584039-avtomaticheskij-pelletnyj-kotel.html. 13.03.2025 р.
FLUENT 5.5 UDF User's Guide. Fluent Inc. September 2000, 563 р.
О. А. Сірий, М. З. Абдулін, і О. В. Баранюк, «Дослідження гідродинаміки потоку повітря в струменево-нішевій системі спалювання палива,» Вісник Національного технічного університету «ХПІ». Серія: Енергетичні та теплотехнічні процеси й устаткування, № 9(1181), 162 с, 2016.

Most read articles by the same author(s)