Mechanical engineering and transport

ROTARY DRAWING OF THE PARTS OF AXISYMMETRIC SHAPE, BASED ON MECHATRONIC DRIVE

Authors

L. H. Kozlov
Vinnytsia National Technical University ROR
I. O. Syvak
Vinnytsia National Technical University ROR
Ye. I. Shevchuk
Higher Vocational School Nо. 1, Vinnytsia
V. A. Kovalchuk
Vinnytsia National Technical University ROR

Keywords

rotary drawing, mechatronic drive, forming stability, tool trajectories, stress, deformations

Abstract

There has been presented the special installation, based on mechatronic drive, for rotary drawing of the parts of axisymmetric shape. Application of mechatronic drives provides the possibility of the tool motion according to the calculated trajectories, which ensures maintaining the component forming stability throughout the drawing process. The choice and realization of the tool spatial motion trajectory essentially expands the capabilities of axisymmetrically-shaped parts of rotational drawing process.

454 230

How to Cite

[1]
“ROTARY DRAWING OF THE PARTS OF AXISYMMETRIC SHAPE, BASED ON MECHATRONIC DRIVE”, Вісник ВПІ, no. 1, pp. 93–98, Mar. 2017, Accessed: Oct. 04, 2026. Available: https://visnyk.vntu.edu.ua/index.php/visnyk/article/view/2017

Author Biographies

L. H. Kozlov, Vinnytsia National Technical University

Dc. Sc. (Eng.), Assistant Professor, Head of the Chair of Machine-Building Technologies and Automation

I. O. Syvak, Vinnytsia National Technical University

Dc. Sc. (Eng.), Professor, Professor of the Chair of Machine-Building Technologies and Automation

Ye. I. Shevchuk, Higher Vocational School Nо. 1, Vinnytsia

Teacher

V. A. Kovalchuk, Vinnytsia National Technical University

Engineer of the Chair of Machine-Building Technologies and Automation

Most read articles by the same author(s)

1 2 > >>