ЕЛЕКТРОГІДРАВЛІЧНИЙ СТЕЖНИЙ ПРИВОД ПРИСТРОЮ  ДЛЯ ОБРОБКИ ПОВЕРХНЕВИМ ПЛАСТИЧНИМ ДЕФОРМУВАННЯМ

О. В. Дерібо; О. В. Сердюк; І. О. Сивак

Mechanical engineering and transport

Electrohydraulic servo drive of the device for surface plastic deformation treatment

Authors

O. V. Deribo

Vinnytsia National Technical University ROR

O. V. Serdiuk

Vinnytsia National Technical University ROR

I. O. Syvak

Vinnytsia National Technical University ROR

Keywords

electrohydraulic servo drive surface plastic deformation control of deformation force mathematical model

Abstract

Electrohydraulic servo drive with deformation force feedback is proposed to be used in the devices for surface plastic deformation (spinning and burnishing). Mathematical model of such drive is developed for simulation numerical study aimed at choosing the drive parameters that provide the necessary technological models.

523 89

How to Cite

[1]

“Electrohydraulic servo drive of the device for surface plastic deformation treatment”, Вісник ВПІ, no. 6, pp. 76–79, Nov. 2010, Accessed: Oct. 29, 2026. Available: https://visnyk.vntu.edu.ua/index.php/visnyk/article/view/1620

Download Citation

Author Biographies

O. V. Deribo, Vinnytsia National Technical University

доцент кафедри технології та автоматизації машинобудування

O. V. Serdiuk, Vinnytsia National Technical University

асистент кафедри технології та автоматизації машинобудування

I. O. Syvak, Vinnytsia National Technical University

завідувач кафедри технології та автоматизації машинобудування

Download PDF

524

views

downloads

Article History

Received: 08.11.2015

Revised: —

Accepted: —

Published: 12.11.2010

Issue: No 6 (2010)

Pages: 76-79

Cite

Metrics

Downloads

Download data is not yet available.

License

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Most read articles by the same author(s)

O. V. Deribo, Zh. P. Dusaniuk, S. V. Repinskyi, D. A. Borovskyi, The Influence of the Base Scheme in the First Operation on the Value of the Allowance for Boring Holes in the Blanks of Body Parts on Tuned Machines , Visnyk of Vinnytsia Politechnical Institute: No. 6 (2018)
O. V. Deribo, Influence of the Basing Scheme on the Basing Error as a Component of the Minimum Intermediate Allowance for Machining , Visnyk of Vinnytsia Politechnical Institute: No. 2 (2021)
O. V. Piontkevych, L. H. Kozlov, O. V. Bereziuk, O. V. Serdiuk, Calculation of the Hydrodynamic Force on the Counterbalance Valve Pin Based on Simulation Flows of the Working Fluid in its Channels , Visnyk of Vinnytsia Politechnical Institute: No. 5 (2024)
O. V. Deribo, Zh. P. Dusaniuk, S. V. Repinskyi, A. O. Paradnyi, V. H. Pyliavets, DYNAMIC CHARACTERISTICS OF ELECTROHYDRAULIC FOLLOWER DRIVE CONTROLLED BY THE FORCE AT THE ACTUATOR , Visnyk of Vinnytsia Politechnical Institute: No 4 (121), 2015
Zh. P. Dusaniuk, O. V. Deribo, S. V. Repinskyi, T. V. Muravynets, S. O. Kozachyshen, MATHEMATICAL MODEL FOR IMITATION RESEARCH IN THE ENVIRONMENT OF MATLAB SIMULINK HYDRAULIC DRIVE OF FORWARD MOTION WITH A LONG PRESSURE HYDROLINE , Visnyk of Vinnytsia Politechnical Institute: No. 3 (2016)
L. H. Kozlov, I. O. Syvak, Ye. I. Shevchuk, V. A. Kovalchuk, ROTARY DRAWING OF THE PARTS OF AXISYMMETRIC SHAPE, BASED ON MECHATRONIC DRIVE , Visnyk of Vinnytsia Politechnical Institute: No. 1 (2017)
Zh. P. Dusaniuk, O. V. Petrov, O. V. Deribo, A. V. Chernysh, MATHEMATICAL MODEL AND ALGORITHM FOR STUDYING DYNAMICS OF THE HYDRAULIC DRIVE OF PART-TURN EXCAVATOR BUCKET TAKING INTO ACCOUNT WAVE PROCESSES IN THE PRESSURE HYDRAULIC LINE , Visnyk of Vinnytsia Politechnical Institute: No 3 (2015)
O. V. Deribo, Zh. P. Dusaniuk, S. V. Repinskyi, M. V. Horal, Dynamics of Electrohydraulic Servo Drive Device for Burnishing of Axially Asymmetric Surfaces , Visnyk of Vinnytsia Politechnical Institute: No. 6 (2017)
O. V. Deribo, S. V. Repinskyi, K. S. Kovalenko, Comparative Analysis of the Results of the Determination of Allowances According to Standards and the Calculation and Analytical Method Using the Dimensional Analysis of Technological Processes , Visnyk of Vinnytsia Politechnical Institute: No. 6 (2022)
O. V. Deribo, Zh. P. Dusaniuk, S. V. Repinskyi, Imitation design of electro-hydraulic watching drive with management by effort on an executive branch , Visnyk of Vinnytsia Politechnical Institute: No 5 (2013)

1 2 3 > >>

Electrohydraulic servo drive of the device for surface plastic deformation treatment

Authors

Keywords

Abstract

How to Cite

Author Biographies

Similar Articles

Most read articles by the same author(s)

Language

forauthors

Make a Submission

editor

Roman Naumovych Kvetnyy

ourlinks

Information

Latest publications

vidviduvannia

Visitors

About the Journal

Navigation

More information about the publishing system, Platform and Workflow by OJS/PKP.