Most read articles by the same author(s)

• O. V. Deribo, Zh. P. Dusaniuk, S. V. Repinskyi, D. A. Borovskyi, The Influence of the Base Scheme in the First Operation on the Value of the Allowance for Boring Holes in the Blanks of Body Parts on Tuned Machines , Visnyk of Vinnytsia Politechnical Institute: No. 6 (2018)
• O. V. Derybo, Zh. P. Dusaniuk, Influence of Technological Factors on the Maximum Allowance for Machining of Flat Surfaces of Blanks of Parts of the Type “Flange” , Visnyk of Vinnytsia Politechnical Institute: No. 3 (2019)
• O. V. Derybo, Zh. P. Dusaniuk, Features of Determination of an Error of Installation as a Component of Machining Allowance , Visnyk of Vinnytsia Politechnical Institute: No. 2 (2020)
• O. V. Deribo, Influence of the Basing Scheme on the Basing Error as a Component of the Minimum Intermediate Allowance for Machining , Visnyk of Vinnytsia Politechnical Institute: No. 2 (2021)
• O. V. Deribo, Zh. P. Dusaniuk, S. V. Repinskyi, A. O. Paradnyi, V. H. Pyliavets, DYNAMIC CHARACTERISTICS OF ELECTROHYDRAULIC FOLLOWER DRIVE CONTROLLED BY THE FORCE AT THE ACTUATOR , Visnyk of Vinnytsia Politechnical Institute: No 4 (121), 2015
• Zh. P. Dusaniuk, O. V. Deribo, S. V. Repinskyi, T. V. Muravynets, S. O. Kozachyshen, MATHEMATICAL MODEL FOR IMITATION RESEARCH IN THE ENVIRONMENT OF MATLAB SIMULINK HYDRAULIC DRIVE OF FORWARD MOTION WITH A LONG PRESSURE HYDROLINE , Visnyk of Vinnytsia Politechnical Institute: No. 3 (2016)
• Zh. P. Dusaniuk, O. V. Petrov, O. V. Deribo, A. V. Chernysh, MATHEMATICAL MODEL AND ALGORITHM FOR STUDYING DYNAMICS OF THE HYDRAULIC DRIVE OF PART-TURN EXCAVATOR BUCKET TAKING INTO ACCOUNT WAVE PROCESSES IN THE PRESSURE HYDRAULIC LINE , Visnyk of Vinnytsia Politechnical Institute: No 3 (2015)
• O. V. Deribo, S. V. Repinskyi, K. S. Kovalenko, Comparative Analysis of the Results of the Determination of Allowances According to Standards and the Calculation and Analytical Method Using the Dimensional Analysis of Technological Processes , Visnyk of Vinnytsia Politechnical Institute: No. 6 (2022)
• O. V. Deribo, Zh. P. Dusaniuk, S. V. Repinskyi, M. V. Horal, Dynamics of Electrohydraulic Servo Drive Device for Burnishing of Axially Asymmetric Surfaces , Visnyk of Vinnytsia Politechnical Institute: No. 6 (2017)
• O. V. Deribo, Zh. P. Dusaniuk, S. V. Repinskyi, Imitation design of electro-hydraulic watching drive with management by effort on an executive branch , Visnyk of Vinnytsia Politechnical Institute: No 5 (2013)