COMPARATIVE ANALYSIS OF PRESSURE STABILIZATION EFFICIENCY FOR EXTRUDER ADJUSTABLE AND NON-ADJUSTABLE ELECTRICAL DRIVE

Authors

  • O. M. Khalimovskyi National Technical University of Ukraine «Kyiv Polytechnic Institute»
  • O. L. Sokolskyi National Technical University of Ukraine «Kyiv Polytechnic Institute»
  • V. I. Sivetskyi National Technical University of Ukraine «Kyiv Polytechnic Institute»
  • I. O. Mikulionok National Technical University of Ukraine «Kyiv Polytechnic Institute»
  • A. A. Nikolaiev National Technical University of Ukraine «Kyiv Polytechnic Institute»

Keywords:

automatic control system, electric drive, extruder, regulator, polymer, oscillations, damping, extrusion

Abstract

Damping capabilities of harmonic component of polymer pressure in extrusion zone for two cases of extruder assembly have been studied: with adjustable electrical drive; with non-adjustable electrical drive and mechanical damping device.

Author Biographies

O. M. Khalimovskyi, National Technical University of Ukraine «Kyiv Polytechnic Institute»

Cand. Sc. (Eng.), Assistant Professor of the Chair of Automation of Electromechanical Systems and Electric Drive

O. L. Sokolskyi, National Technical University of Ukraine «Kyiv Polytechnic Institute»

Cand. Sc. (Eng.), Assistant Professor of the Chair of Chemical, Polymer and Silicate Engineering

V. I. Sivetskyi, National Technical University of Ukraine «Kyiv Polytechnic Institute»

Cand. Sc. (Eng.), Professor of the Chair of Chemical, Polymeric and Silicate Engineering

I. O. Mikulionok, National Technical University of Ukraine «Kyiv Polytechnic Institute»

Dr. Sc. (Eng.), Professor, Honored Inventor of Ukraine, Professor of the Chair of Chemical, Polymer and Silicate Engineering

A. A. Nikolaiev, National Technical University of Ukraine «Kyiv Polytechnic Institute»

Student of Engineer-Chemical Department

References

1. Сокольський О. Л. Проектування формуючих пристроїв обладнання для переробки пластмас : навч. посiб. /
О. Л. Сокольський, В. І. Сівецький, І. О. Мікульонок. — К. : НТУУ «КПІ», 2014. — 148 с.
2. Производство изделий из полимерных материалов : учеб. пос. / В. К. Крыжановский, М. Л. Кербер, В. В. Бурлов, А. Д. Паниматченко. — СПб. : Профессия, 2004. — 464 с.
3. Раувендааль К. Выявление и устранение проблем в экструзии ; пер. с англ. / К. Раувендааль, Х. Харрис, М. Д. Пилар Норьега. — СПб. : изд-во «Профессия», 2011 — 368 с.
4. Сборник задач по теории автоматического регулирования и управления / [В. А. Бесекерский и др.]. — М. : Наука, 1978. — 512 с.
5. Ким В. С. Теория и практика экструзии полимеров : учеб. пос. / В. С. Ким. — М. : Колос С., 2005. — 568 с.

Downloads

Abstract views: 126

Published

2016-05-13

How to Cite

[1]
O. M. Khalimovskyi, O. L. Sokolskyi, V. I. Sivetskyi, I. O. Mikulionok, and A. A. Nikolaiev, “COMPARATIVE ANALYSIS OF PRESSURE STABILIZATION EFFICIENCY FOR EXTRUDER ADJUSTABLE AND NON-ADJUSTABLE ELECTRICAL DRIVE”, Вісник ВПІ, no. 2, pp. 80–83, May 2016.

Issue

No. 2 (2016)

Section

Energy generation and electrical engineering

Metrics

Downloads

Download data is not yet available.

License

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Most read articles by the same author(s)