NUMERICAL ANALYSIS OF DURABILITY OF CANISTER AT STATIC AND DYNAMIC LOADING

Authors

  • O. V. Hondliakh National Technical University of Ukraine «Kyiv Polytechnic Institute»
  • O. M. Tymonin National Technical University of Ukraine «Kyiv Polytechnic Institute»
  • A. O. Chemerys National Technical University of Ukraine «Kyiv Polytechnic Institute»
  • V. Yu. Onopriienko National Technical University of Ukraine «Kyiv Polytechnic Institute»
  • A. V. Kopylenko National Technical University of Ukraine «Kyiv Polytechnic Institute»

Keywords:

canister, oil, deformation, safety factor, mold, software package

Abstract

On the base of the developed finite element models the numerical analysis has been conducted and the tensely-deformed state of canister for lube oil is defined in the paper. Results of numerical analysis of canisters for oil products at their stack storage, and also at their falling have been brought. On the basis of the executed calculations design-and-engineering recommendations on planning of similar sort of wares have been offered.

Author Biographies

O. V. Hondliakh, National Technical University of Ukraine «Kyiv Polytechnic Institute»

Dr. Sc. (Eng.), Professor, Professor of the Chair of Chemical, Polymeric and Silicate Engineering

O. M. Tymonin, National Technical University of Ukraine «Kyiv Polytechnic Institute»

Cand. Sc. (Eng.), Assistant Professor Assistant Professor of the Chair of Chemical, Polymeric and Silicate Engineering

A. O. Chemerys, National Technical University of Ukraine «Kyiv Polytechnic Institute»

Senior Lecturer of the Chair of Chemical, Polymeric and Silicate Engineering

V. Yu. Onopriienko, National Technical University of Ukraine «Kyiv Polytechnic Institute»

Post-Graduate Student of the Chair of Chemical, Polymeric and Silicate Engineering

A. V. Kopylenko, National Technical University of Ukraine «Kyiv Polytechnic Institute»

Cand. Sc. (Eng.), Assistant Professor, Assistant Professor of the Chair of Machines and Equipment for Chemical and Petrochemical Plants

References

1. Дж. Л. Уайт, Д. Д. Полиэтилен, полипропилен и другие полиолефины / пер. с англ. под. ред. Е. С. Цобкалло. — СПб. : Профессия, 2006. — 256 стр., ил.
2. Технические условия на канистры 2297-043-05757601-98.
3. Нелинейные задачи механики многослойных оболочек / [В. А. Баженов, А. С. Сахаров, А. В. Гондлях, С. Л. Мельников]. — К. : 1994. — 264 с.
4. Лукасевич С. Локальные нагрузки в пластинах и оболочках / С. Лукасевич. — М. : Мир, 1982. — 544 с.
5. Метод конечных элементов в механике твердых тел / под общ. ред. А. С. Сахарова и И. Альтенбаха. — Киев : Вища школа., 1982. — 480 с.

Downloads

Abstract views: 133

Published

2015-12-18

How to Cite

[1]
O. V. Hondliakh, O. M. Tymonin, A. O. Chemerys, V. Y. Onopriienko, and A. V. Kopylenko, “NUMERICAL ANALYSIS OF DURABILITY OF CANISTER AT STATIC AND DYNAMIC LOADING”, Вісник ВПІ, no. 5, pp. 123–130, Dec. 2015.

Issue

No. 5 (2015)

Section

Mechanical engineering and transport

Metrics

Downloads

Download data is not yet available.

License

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).