Investigation of Temperature Influence on Physical Parameters of Semiconductor -Metoxo(Cuprum(II), Bismut(III)) Acetylacetonate

Authors

  • O. V. Osadchuk Vinnytsia National Technical University
  • V. V. Martyniuk Vinnytsia National Technical University
  • M. V. Yevsieieva Vinnytsia National Technical University
  • O. O. Seletska Vinnytsia National Technical University

DOI:

https://doi.org/10.31649/1997-9266-2019-145-4-80-86

Keywords:

induction, magnetic field, concentration, semiconductor, heterometal complex compounds

Abstract

Heterrometal complex compounds have a semiconductor type of conductivity, the operating temperature range of which depends on the nature of the central metal atoms, bridge ligands, stereochemistry of the metal-ligand environment, and can be used as a semiconductor material.

The method of synthesis of heterometal μ-methoxone (kuprum (II), bismuth (III)) acetylacetonate (I) has been developed.

An acetylacetonate of the composition Cu3Bi (AA 4 (OCH3) 5, where HAA = H3C–C (O)–CH2–C (O)–CH3, is synthesized in the semiconductor material μ-methoxy (cupram (II), bismuth (III). The purpose of the study is to study the influence of temperature on the physical parameters of the synthesized semiconductor material. Experimental measurements and theoretical calculations of dependencies of the basic physical parameters of this material on temperature and magnetic field are carried out. Thus, in the temperature range from 273 K to 493 K, the specific resistance decreased from 1,35⋅1014 Om to 1,5⋅10–4 Om; the resistance of the sample, in the dimensions 0,5×0,5×0,15 mm, at 273 K is equal to 9,01⋅1017 Оm, and at 493 К — 1 Оm; the concentration of charge carriers at a temperature of 273 K is 4,9 ⋅1017 m-3, at 323 K — 8,2⋅1023 m-3, whereas at a temperature of 493 K the carrier concentration is already 4,4⋅1035 m-3; the current value at a voltage of 1 V and a temperature of 273 K — I = 1,1⋅10–18 A, the maximum value of current is achieved at a temperature of 493 K — I = 0,99 A. The dependence of the Hallfield field intensity in the middle of the semiconductor on the induction of a magnetic field at different temperatures, and Voltage Volts show that the given values are not temperature dependent and coincide in one line. In the range from 0 to 200 mT, the Hall effect increases from 1,12⋅10–11 to 2,24⋅10–10 V, from 200 to 600 mT — from 2,24⋅10–10 V to 6,73⋅10–10 V and from 600 mT to 1000 mT — Hall's voltage rises from 6,73⋅10–10 to 1,12⋅10–9 V. It is proved that this material is a semiconductor, and with the carriers of the charge of both signs.

Author Biographies

O. V. Osadchuk, Vinnytsia National Technical University

Professor, Head of the Chair of Radio Engineering

V. V. Martyniuk, Vinnytsia National Technical University

Cand. Sc. (Eng.), Associate Professor of the Chair of Electronics and Nanosystems

M. V. Yevsieieva, Vinnytsia National Technical University

Cand. Sc. (Chemistry), Associate Professor, Associate Professor of the Chair of Chemistry and Chemical Technology

O. O. Seletska, Vinnytsia National Technical University

Cand. Sc. (Eng.), Senior Lecturer of the Chair of Electronics and Nanosystems

Downloads

Abstract views: 207

Published

2019-08-30

How to Cite

[1]
O. V. Osadchuk, V. V. Martyniuk, M. V. Yevsieieva, and O. O. Seletska, “Investigation of Temperature Influence on Physical Parameters of Semiconductor -Metoxo(Cuprum(II), Bismut(III)) Acetylacetonate”, Вісник ВПІ, no. 4, pp. 80–86, Aug. 2019.

Issue

Section

Radioelectronics and radioelectronic equipment manufacturing

Metrics

Downloads

Download data is not yet available.

Most read articles by the same author(s)

1 2 3 4 > >>