Dynamics of Electrohydraulic Servo Drive Device for Burnishing of Axially Asymmetric Surfaces

Authors

  • O. V. Deribo Vinnytsia National Technical University
  • Zh. P. Dusaniuk Vinnytsia National Technical University
  • S. V. Repinskyi Vinnytsia National Technical University
  • M. V. Horal Vinnytsia National Technical University

Keywords:

device for roller burnishing, axially asymmetric surfaces, electrohydraulic servo drive, feedback on pressure drop, dynamic characteristics, simulation modeling, environment MATLAB Simulink

Abstract

The mathematical model of the electrohydraulic servo drive with feedback on the pressure difference in the cavities of the actuating hydraulic cylinder of the device for roller burnishing of the axially asymmetric surfaces has been developed. The device generates a specified force on the tool. For simulating drive modulation in the MATLAB Simulink environment, an appropriate computing structure (block diagram) is developed. The effect of drive parameters on its dynamical characteristics has been investigated.

Author Biographies

O. V. Deribo, Vinnytsia National Technical University

Cand. Sc. (Eng.), Assistant Professor, Professor of the Chair of Mechanical Engineering Technologies and Automation

Zh. P. Dusaniuk, Vinnytsia National Technical University

Cand. Sc. (Eng.), Assistant Professor, Assistant Professor of the Chair of Mechanical Engineering Technologies and Automation

S. V. Repinskyi, Vinnytsia National Technical University

Cand. Sc. (Eng.), Assistant Professor, Professor of the Chair of Mechanical Engineering Technologies and Automation

M. V. Horal, Vinnytsia National Technical University

Student of the Department of Mechanical Engineering and Transport

References

1. Дерібо О. В. Електрогідравлічний стежний привод пристрою для обробки поверхневим пластичним деформуванням / О. В., Дерібо, І. О. Сивак, О. В. Сердюк // Вісник Вінницького політехнічного інституту. — 2010. — № 6. — С. 76―79.
2. Дерібо О. В. Імітаційне моделювання електрогідравлічного слідкувального приводу з керуванням зусиллям на виконавчому органі / О. В. Дерібо, Ж. П. Дусанюк, С. В. Репінський // Вісник Вінницького політехнічного інституту. — 2013. — № 5. — С. 110—116.
3. Смелянский В. М. Механика упрочнения деталей поверхностным пластическим деформированием / В. М. Смелянский. — М. : Машиностроение, 2002. — 300 с.
4. Электрогидравлические следящие системы / [В. А. Хохлов, В. Н. Прокофьев, Н. А. Борисова и др.] ; под ред. В. А. Хохлова. — М. : Машиностроение, 1971. —432 с.
5. Лещенко В. А. Гидравлические следящие приводы станков с программным управлением / В. А. Лещенко. — М. : Машиностроение, 1975. — 288 с.

Downloads

Abstract views: 162

Published

2017-12-26

How to Cite

[1]
O. V. Deribo, Z. P. Dusaniuk, S. V. Repinskyi, and M. V. Horal, “Dynamics of Electrohydraulic Servo Drive Device for Burnishing of Axially Asymmetric Surfaces”, Вісник ВПІ, no. 6, pp. 141–146, Dec. 2017.

Issue

No. 6 (2017)

Section

Mechanical engineering and transport

Metrics

Downloads

Download data is not yet available.

License

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Most read articles by the same author(s)

1 2 3 > >>