No. 2 (2025)

Automation and information-measuring equipment

Analysis of the Metrological Characteristics of a Coordinate Measuring Machine

L. V. Kolomiets, O. O. Shelukha

8-14

Abstract views: 4 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-8-14
- pdf (Українська)
Vibration Displacement Measurement Channel with Capacitive Sensor

O. V. Oselskyi, V. V. Kukharchuk

15-22

Abstract views: 5 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-15-22
- pdf (Українська)

Civil engineering

Enhencement of Energy Efficiency of Buildings by Finishing External Enclosing Structures with Heat-Absorbing Coatings

Yu. L. Kovalenko, А. P. Polyvianchuk, V. A. Malyarenko, Ye. H. Ponomarenko

23–31

Abstract views: 7 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-23-31
- pdf (Українська)

ECOLOGY AND ENVIRONMENTAL SECURITY

A New System of Using Bioplateau for Cleaning Rivers in the Mountain Runway Formation Area

L. E. Tymurova, V. V. Faichuk, M. V. Katkov, L. P. Pashkevych

32-38

Abstract views: 7 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-32-38
- pdf (Українська)
Analysis of the Efficiency of Modern Denitrification Technologies for Flue Gases from Coal-Fired Boilers. Analysis of Problems and Prospects

Zhang Le, А. P. Polyvianchuk

39-44

Abstract views: 9 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-39-44
- pdf (Українська)
System Analysis of the Geoecological State of Urban Soils in the City of Cherkasy

О. О. Mysliuk, O. V. Yehorova, O. M. Khomenko

45-52

Abstract views: 21 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-45-52
- pdf (Українська)
Alkaline and Zinc-Carbon Batteries. Comparative Analysis and their Recycling

А. P. Ranskiy, О. A. Gordienko, V. A. Ishchenko, M. M. Tomchuk

53-61

Abstract views: 19 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-53-61
- pdf (Українська)

ENERGY GENERATION, ELECTRIC ENGINEERING AND ELECTROMECHANICS

Mathematical Models of Optimal Movement of Electric Car with Asynchronous Electric Drive on a Horizontal Section of the Road with the existing Settlement on it and a Stop in this Settlement

B. I. Mokin, O. B. Mokin, B. V. Pasieka

62-70

Abstract views: 8 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-62-70
- pdf (Українська)
Assessment of Water Heater Resource Features for Demand Response in the Energy System

V. M. Kiianchuk, K. V. Makhotilo

71-80

Abstract views: 4 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-71-80
- pdf (Українська)
Analysis of Vibrations of Overhead Power Lines During Ice Melting with Direct Current

V. V. Kuchanskyy, Ye. O. Zaitsev, O. M. Kovalenko

81-90

Abstract views: 7 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-81-90
- pdf (Українська)
Frequency Starting of the Electric Drive of the Above Resonance Vibration Machine

V. Yu. Nozhenko

91-96

Abstract views: 5 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-91-96
- pdf (Українська)
Assessment of the Performance of the Compressed Air Preparation System of the High-Voltage Air Circuit Breaker

V. V. Grabko, V. V. Grabko, V. V. Nykolayenko

97-103

Abstract views: 4 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-97-103
- pdf (Українська)
The Problem of Scheduling the Maintenance of Power Grid Facilities

O. H. Zhdanova, V. D. Popenko, L. V. Rybachuk, O. V. Savchuk

104-110

Abstract views: 4 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-104-110
- pdf (Українська)

Information technologies and computer sciences

Automated Planning in Intelligent Distributed Systems Using a Multi-Agent Approach Based on LLM

O. O. Mediakov, M. Yu. Khorkanin

111-117

Abstract views: 6 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-111-117
- pdf (Українська)
Visual-Inertial Slam Using the Extended Kalman Filter for Autonomous Navigation

A. V. Zharkov, R. V. Maslii

118-126

Abstract views: 7 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-118-126
- pdf (Українська)
Intelligent Technology for Converting Natural Language into SQL Queries

V. M. Borysiuk, A. V. Kozlovskyi

127-131

Abstract views: 4 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-127-131
- pdf (Українська)
Ray Tracing Algorithm Based on Screen Space Ray Marching

R. M. Pikulsky

132-137

Abstract views: 5 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-132-137
- pdf (Українська)
Adaptive Hypermodels Usage in Person Re-Identification

O. M. Kyrylenko, R. N. Kvyetnyi, V. V. Garmash, V. Yu. Kotsiubynskyi

138-146

Abstract views: 5 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-138-146
- pdf (Українська)
Technology for Developing a Recommendation Chatbot Based on Large Language Models for IoT System Design

D. V. Honcharenko, V. B. Mokin

147-156

Abstract views: 9 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-147-156
- pdf (Українська)

Mechanical engineering and transport

Increasing the Quality of Metal-Cutting Tools Operating under Radiation Exposure Conditions

N. V. Tarelnik, A. O. Dotsenko

157-163

Abstract views: 5 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-157-163
- pdf (Українська)
Optimization of the Structure of the Production and Technical Base of Motor Transport Enterprises

Ye. V. Smyrnov, V. O. Ohnevyi, D. V. Borysiuk

164-170

Abstract views: 4 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-164-170
- pdf (Українська)
Analysis of Methods for Strengthening the Surface Layers of Parts of Gas Bearings

I. V. Vishtak, M. M. Kudratov

171-178

Abstract views: 5 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-171-178
- pdf (Українська)
Some Aspects of the Classification of Technological Methods for Creating Working Surfaces of Machine Parts

S. V. Kovalevskyy, N. S. Semichasnova, P. A. Kuzmenko

179-186

Abstract views: 4 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-179-186
- pdf (Українська)

Radioelectronics and radioelectronic equipment manufacturing

Computer Vision Direction System

I. S. Kolesnyk, O. S. Gorodetska, N. V. Dobrovolska

187-194

Abstract views: 6 | Downloads: 0

DOI https://doi.org/10.31649/1997-9266-2025-179-2-187-194
- pdf (Українська)

Automation and information-measuring equipment

Analysis of the Metrological Characteristics of a Coordinate Measuring Machine

Vibration Displacement Measurement Channel with Capacitive Sensor

Civil engineering

Enhencement of Energy Efficiency of Buildings by Finishing External Enclosing Structures with Heat-Absorbing Coatings

ECOLOGY AND ENVIRONMENTAL SECURITY

A New System of Using Bioplateau for Cleaning Rivers in the Mountain Runway Formation Area

Analysis of the Efficiency of Modern Denitrification Technologies for Flue Gases from Coal-Fired Boilers. Analysis of Problems and Prospects

System Analysis of the Geoecological State of Urban Soils in the City of Cherkasy

Alkaline and Zinc-Carbon Batteries. Comparative Analysis and their Recycling

ENERGY GENERATION, ELECTRIC ENGINEERING AND ELECTROMECHANICS

Mathematical Models of Optimal Movement of Electric Car with Asynchronous Electric Drive on a Horizontal Section of the Road with the existing Settlement on it and a Stop in this Settlement

Assessment of Water Heater Resource Features for Demand Response in the Energy System

Analysis of Vibrations of Overhead Power Lines During Ice Melting with Direct Current

Frequency Starting of the Electric Drive of the Above Resonance Vibration Machine

Assessment of the Performance of the Compressed Air Preparation System of the High-Voltage Air Circuit Breaker

The Problem of Scheduling the Maintenance of Power Grid Facilities

Information technologies and computer sciences

Automated Planning in Intelligent Distributed Systems Using a Multi-Agent Approach Based on LLM

Visual-Inertial Slam Using the Extended Kalman Filter for Autonomous Navigation

Intelligent Technology for Converting Natural Language into SQL Queries

Ray Tracing Algorithm Based on Screen Space Ray Marching

Adaptive Hypermodels Usage in Person Re-Identification

Technology for Developing a Recommendation Chatbot Based on Large Language Models for IoT System Design

Mechanical engineering and transport

Increasing the Quality of Metal-Cutting Tools Operating under Radiation Exposure Conditions

Optimization of the Structure of the Production and Technical Base of Motor Transport Enterprises

Analysis of Methods for Strengthening the Surface Layers of Parts of Gas Bearings

Some Aspects of the Classification of Technological Methods for Creating Working Surfaces of Machine Parts

Radioelectronics and radioelectronic equipment manufacturing

Computer Vision Direction System

Language

Make a Submission

Information

Visitors

Current Issue